H3C S5130-HI is the latest development of Gigabit speed Layer 3 Ethernet switch. This powerful and highly secure series switch is built based on industry-leading high performance hardware architecture and H3C Comware V7 platform. It supports diversified services, high capacity GE access port as well as high density 10GE uplink, which meet the requirements for high density campus access and high performance aggregation.
H3C S5130-HI series Ethernet switch includes the following models:
S5130-30S-HI: 24 10/100/1000BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports, 2 QSFP+ stacking ports;
S5130-54S-HI: 48 10/100/1000BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports, 2 QSFP+ stacking ports;
S5130-30C-HI: 24 10/100/1000BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports, 1 expansion slot, 2 fan module slots, 2 power module slots;
S5130-34C-HI: 28 10/100/1000BASE-T Ethernet ports, 8 1G SFP (Combo) ports, 4 10G/1G BASE-X SFP+ ports, 1 expansion slot; 2 fan module slots, 2 power module slots;
S5130-54C-HI: 48 10/100/1000BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports, 1 expansion slot; 2 fan module slots, 2 power module slots;
S5130-30C-PWR-HI: 24 10/100/1000BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports, 1 expansion slot, 2 fan module slots, 2 power module slots;
S5130-54C-PWR-HI: 48 10/100/1000BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports, 1 expansion slot, 2 fan module slots; 2 power module slots;
S5130-30F-HI: 24 SFP ports, 8 10/100/1000BASE-T Ethernet (Combo) ports, 4 10G/1G BASE-X SFP+ ports, 1 expansion slot, 2 fan module slots, 2 power module slots;
S5130-54QS-HI: 48 10/100/1000BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports, 2 QSFP+ stacking ports, 2 fan module slots, 2 power module slots;
The following contents are relatively complicated, please use PC for browsing.
Pls enter c.h3c.com.cn in the PC browser and follow the instruction from the page, you will continue to sync to PC.
Continue mobile phone browsing.
High-performance IPv4/IPv6 service capabilities
The S5130-HI switch series comes with IPv4/IPv6 dual-stack platform which provides sophisticated IPv4/IPv6 solutions by supporting multiple tunnels, IPv4/IPv6 Layer 3 routing protocols, multicasting, and policy-based routing. The S5130-HI switch is a mature commercial IPv6 product that has passed the IPv6 network access certification of the Chinese Ministry of Industry and Information Technology and the IPv6 Ready Phase II certification.
H3C S5130-HI switch series is pre-built with Intelligent Resilient Framework 2 (IRF2). IRF2 provides the following benefits:
High scalability: With IRF2, plug-n-play device aggregation can be achieved by adding one or more switches into the IRF2 stack and enabling IRF2 stacking on the new device. New devices can be managed with a single IP, and upgraded at the same time to reduce network expansion cost.
High reliability: The IRF2 patented 1:N backup technology allows each slave device in the IRF2 stack to serve as the backup of the master, creating control and data link redundancy, as well as uninterrupted layer-3 forwarding. This improves the reliability, avoids unplanned business downtime and serves to improve overall performance. When the master device fails, traffic remains uninterrupted.
Load balancing: IRF2 supports cross-device link aggregation, upstream and downstream can be connected to more than one physical link, which creates another layer of network redundancy and boosts the network resource utilization.
Availability: H3C Implements IRF2 through standard Forty Gigabit Ethernet (40GE) or Ten Gigabit Ethernet (10GE) ports which allocates bandwidth for business and application access and reasonably splits local traffic and upstream traffic. IRF2 rules can not only be obeyed within and across the rack, but also across the LAN.
Software Defined Network (SDN) is an innovative network architecture that simplifies network management and reduces maintenance complexity by separating network control layer and network forwarding layer through Openflow. More importantly, it implements flexible network flow control and provides a well-defined network platform for core network application and innovation.
The S5130-HI network switch series supports a large network flow table. Combined with H3C SDN controller, it can easily implement a two-layer network architecture and quickly add functions in existing network in order to drastically reduce network management complexity while substantially lowers network maintenance cost.
The S5130-HI switch series supports high availability at device level and link level.
The S5130-HI switch series adopts hot swappable dual-power supply and dual fan module design, which allows you to configure AC or DC power supplies as needed. The switch can detect faults in power supplies and fans, and will if any such faults are found, respond with an alarm. It can automatically adjust fan speed according to the temperature.
Apart from device level redundancy, the S5130-HI series switch also provides diverse link redundancy support such as LACP/STP/RSTP/MSTP/Smart Link protocols. It supports IRF2 and 1: N redundancy backup as well as cross-device link aggregation which substantially increases network reliability.
The S5130-HI switch series supports packet filtering at Layer 2 through Layer 4, and traffic classification based on source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UDP port numbers, protocol types, and VLANs. It supports flexible queue scheduling algorithms based on ports and queues, including strict priority (SP), weighted round Robin (WRR), SP+WRR, weighted fair queuing (WFQ), and WDRR. The S5130-HI switch series enables committed access rate (CAR) with the minimum granularity of 8 kbps. It supports port mirroring in the outbound and inbound directions, to monitor the packets on the specific ports, and to mirror the packets to the monitor port for network detection and troubleshooting.
The S5130-HI switch series uses built-in lighting protection technology and supports industry leading switch port 6KV anti-lighting capability, which can greatly reduce the rate of lightning damage to the equipment.
H3C S5130HI switch series supports 802.3af/802.3at PoE function, single port can provide maximum 30w, providing power to connected devices, such as IP phones, wireless APs, and high power cameras. H3C S5130HI switch series supports multiple PoE modules for flexible PoE output selections, single switch can provide total 1440W PoE power, 30w per port and total 48 ports PoE+ function.
S5130-HI switch series supports hardware level encryption technology MACsec (802.1ae), which is an industry-standard security technology that provides secure communication for all traffic on Ethernet links. Compared with traditional application based software encryption technology, MACsec provides point-to-point security on Ethernet links between directly connected nodes and is capable of identifying and preventing most security threats.
MACsec supports two modes, Client-originated mode protects client access and Device-originated mode protects inter-devices link. Together with H3C inode client software and core switches including 7500E V7 and 10500, H3C delivers total MACsec solution.
The S5130-HI switch series supports abundant management ports, such as the console port, mini-USB and the out-of-band network management port. It supports the Simple Network Management Protocol (SNMP) v1/v2/v3, Open View, IMC, CLI, Web-based NMS and Telnet allowing easy device management. It also supports SSH2.0 to provide better protection management.
The S5130-HI switch supports SPAN/RSPAN/ERSPAN mirroring., and multiple mirroring ports so that network traffic can be analyzed to carry out corresponding management, and maintenance measures, and traffic of network services and applications is visible. The S5130-HI switch provides network stream analysis reports, which help users to promptly optimize the network structure and adjust resource deployment.
(W × D × H)
Front panel dataports
BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports; 2 QSFP+ stacking ports
BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports
BASE-T Ethernet ports, 8 1G SFP (Combo) ports, 4 10G/1G BASE-X SFP+ ports
BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports
24 SFP ports; 8 10/100/
BASE-T Ethernet (Combo) ports; 4 10G/1G BASE-X SFP+ ports
BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports
1000BASE-T Ethernet ports, 4 10G/1G BASE-X SFP+ ports
BASE-T Ethernet ports; 4 10G/1G BASE-X SFP+ ports; 2 QSFP+ stacking ports
2-port 10G SFP+ interface card
2-port 10GBaseT interface card
2-port QSFP+ stacking interface card
Multiple controllers (EQUAL, master/slave)
Multiple tables flow
GE/10GE port aggregation
IEEE802.3x flow control (full duplex)
Storm control based on port rate percentage
PPS/BPS-based storm control
Blackhole MAC address
Configurable maximum number of MAC addresses that can be learned by a port
QinQ and selective QinQ
Layer 2 ring network
DHCP Snooping option82/DHCP Relay option82
Distributed device management, distributed link aggregation, and distributed resilient routing
Stacking through standard Ethernet interfaces
Local device stacking and remote device stacking
RIPv1/v2 and RIPng
OSPFv1/v2 and OSPFv3
BGP4 and BGP4+ for IPv6
ECMP and policy-based routing
Neighbor discovery (ND)
IPv6-Telnet and IPv6-Ping
IGMP snooping v1/v2/v3 and MLD Snooping v1/v2
PIM SM PIM DM
N:4 port mirroring
Local and remote port mirroring
Packet filtering at Layer 2 through layer 4 Traffic classification based on source MAC addresses, destination MAC addresses, source IPv4/IPv6 addresses,
destination IPv4/IPv6 addresses, TCP/UDP port numbers, protocol types, and VLANs
Time range-based ACL
Port rate limit (receiving and transmitting)
802.1p DSCP remarking
Committed access rate (CAR)
Eight output queues on each port, and 48 queues on the CPU port
Flexible queue scheduling algorithms based on ports and queues, including SP, WRR, WFQ, SP+WRR, and WDRR
Hierarchical user management and password protection
802.1X authentication, centralized MAC authentication
DHCP snooping and anti-fraud DHCP server
Dynamic ARP inspection, preventing man-in-the-middle attacks and ARP DoS attacks
BPDU guard and Root guard
URPF, prevent source IP spoofing, viruses and attacks
Plaintext and MD5 authentication of OSPF and RIPv2 packets
Loading and upgrading through XModem/FTP/TFTP
Configuration through CLI, Telnet, and console port
SNMPv1/v2/v3 and Web-based NMS
Remote monitoring (RMON ) alarm, event, and history recording
System log, alarming based on severities, and output of debugging information
Alarm for power supplies, fans, and temperature
Ping and Tracert
Virtual cable test (VCT)
Device link detection protocol (DLDP)
Port auto Power down
Port schedule down
Non PoE model input voltage:
AC：Rated voltage range：100V～240V AC, 50/60Hz
DC：Maximum voltage range -36V～-72V DC
PoE model input voltage:
360W AC: 100V～240V, 50Hz～60Hz
720W AC: 100V～240V, 50Hz～60Hz
1110W AC: 115V～240V, 50Hz～60Hz
AC:880W (including 740W PoE)
AC: 1700W (including 1440W PoE)